A grease trap gives fats and food particles time to separate from wastewater. As grease floats and solids settle, they take up space needed for that separation. Buildup near the outlet can contribute to slow drainage or let grease move farther down the line. Standing water in the sink is a sign worth checking alongside the trap's maintenance history. Call to describe what your kitchen is experiencing to a provider in your area.
Call (707) 722-9594 to reach a provider →
What a pump-out removes
A pump-out removes the floating grease layer, wastewater and settled solids from the trap or interceptor. Removing all the contents gives the trap room to separate grease from incoming wastewater again.
Ask whether the service includes scraping buildup from the walls and baffles and checking the outlet tee. The work can also reveal damage or obstructions that need further attention.
- Floating fats, oils and grease
- Wastewater held inside the trap
- Food particles and other settled solids
The 25 percent rule and how frequency is set
Many local authorities use the 25 percent rule as a guide. It calls for pumping before the combined depth of floating grease and settled solids reaches 25 percent of the total liquid depth.
The rate of buildup depends on what your kitchen prepares and how much grease enters the drains. A fryer-heavy kitchen can reach that level in a couple of weeks, while a light-prep kitchen may take much longer.
Your city or sewer district sets the schedule that applies to your kitchen. Keep track of buildup and service records to help plan pump-outs around those requirements.
What the provider should leave you
Ask for a manifest or service record after the pump-out, along with an entry in your maintenance log. These documents help you show what was removed and when the work took place.
- The service date and location
- The amount of waste removed
- The destination for the collected waste
- Notes about the trap, baffles or outlet
Keep the paperwork where you can find it for an inspection. Check that the details match your kitchen and add it to your maintenance file.
Signs you are overdue
- A thick grease layer visible inside the trap can mean buildup needs attention.
- Food solids collecting near the bottom can reduce the space available for wastewater.
- Slow sink drainage may point to buildup around the trap or its outlet.
- Odors near the trap can accompany accumulated grease and food waste.
- Grease visible in a downstream sample box can suggest the trap needs attention.
Check the trap and your maintenance log for buildup and the date of the last pump-out. Note any changes you have seen during prep or cleanup.
What happens to the waste after pumping
The material removed from a trap contains grease, wastewater and food solids. It is hauled away for handling at a facility that accepts this kind of waste, rather than being returned to the kitchen drain.
Handling can vary by facility and local requirements. Ask where the waste will go and keep the manifest with your maintenance paperwork. That document can help you account for the pump-out when needed.
What affects the price of a pump-out
The size of the trap or interceptor and the amount of material inside can affect the work involved. Access matters too: a trap under kitchen equipment or an interceptor with a hard-to-reach cover may take more effort to service. Thick buildup, cleaning around baffles and the outlet, and waste hauling can also affect the price. Describe the equipment and its location when discussing the work so the provider can explain what is included.
Grease trap pumping questions
How do I know when my trap was last pumped?
Check your maintenance log and manifests for the most recent date. If you cannot find them, ask the person who handles kitchen maintenance or the previous provider for a copy.
Does pumping include cleaning the walls and baffles?
That depends on the service. Ask whether the pump-out includes scraping the walls and baffles, clearing buildup around the outlet tee and noting any visible damage. Have the scope explained before the work starts.
Can I set up a recurring pumping schedule?
You can discuss a recurring schedule with a provider. The right frequency depends on grease and solids buildup as well as local requirements. Keep your maintenance log and check buildup so the schedule can be adjusted if needed.
Do I need to be on site during the pump-out?
Ask the provider what access is needed before the visit. Someone may need to unlock the kitchen or show where the trap or interceptor is located. Make sure the paperwork can be left where you can find it.