Grease and food solids collect in an interceptor before wastewater moves on to the sewer. Buildup around the outlet can restrict flow, while residue on internal parts can make them harder to check. Slow drains or standing water in the sink can mean the interceptor needs attention, though a blocked line can cause similar symptoms. Call to describe the problem to a nearby provider.
Call (707) 722-9594 to reach a provider →
How interceptors differ from indoor traps
An indoor grease trap is typically close to kitchen fixtures, while an interceptor is usually installed below ground outside. Both hold back grease and solids as wastewater passes through, but access and cleaning methods can differ.
Interceptors are sized by capacity, commonly from about 500 to several thousand gallons. Their lids may be in a parking or service area, so locating them and keeping access clear can help with cleaning.
What thorough cleaning includes
- Pumping out accumulated grease, wastewater and settled food solids from the interceptor.
- Removing residue from tank walls and other reachable surfaces after the contents are pumped.
- Cleaning around the inlet and outlet tees so their openings can be checked.
- Clearing buildup from baffles and looking for visible damage or loose parts.
- Checking and cleaning the sample box, if the system has one.
- Using water jetting where needed to loosen stubborn buildup on accessible surfaces.
Ask what the service includes and keep the cleaning documentation with your kitchen's maintenance paperwork.
Confined space considerations
An interceptor is a confined space where hazardous gases and a lack of oxygen can make entry dangerous. Cleaning is usually done from above through the access openings, using hoses and tools to reach inside.
Never enter an interceptor to check or clean it yourself. Keep the area around the lids clear, and tell the provider about access problems or lids that are difficult to open. Any entry requires appropriate confined-space procedures and equipment.
Inspecting tees, baffles and lids
The inlet and outlet tees guide wastewater through the interceptor. Grease around their openings can restrict flow, while a damaged or missing tee can affect how well the tank holds grease back.
Baffles help direct flow inside the tank. Once buildup is cleared, visible cracks, loose fittings or missing sections may be easier to spot. Ask for any observed damage to be noted in the service record.
Lids also need attention. A damaged lid or one that does not sit securely can create an access and safety concern. Keep the area around each lid clear so its condition can be checked.
How buildup affects inspections
Heavy grease or solids can make it difficult to see the outlet tee and baffles during an inspection. Buildup in a sample box can also interfere with access to the wastewater sample point.
Keep service records that show what was cleaned and note any damage found. Your city or sewer district sets local requirements, so check what records and conditions apply to your kitchen. Cleaning before an inspection can make the interior easier to assess.
What affects the price of interceptor cleaning
The interceptor's capacity and the amount of grease and solids inside can affect the work involved. Access matters too: buried lids, limited space for equipment or a long distance from the access point can change the job. Jetting, cleaning a sample box and disposing of the removed material may also be factors. Describe your setup and ask the provider what is included in the quoted service.
Grease interceptor cleaning questions
Is interceptor cleaning different from interceptor pumping?
Pumping removes the interceptor's contents. Cleaning also addresses residue on accessible walls and parts, such as tees and baffles. Ask whether the proposed service includes those areas and the sample box, if present.
How do I find my interceptor?
Look for access lids outside the building, often near the kitchen or in a parking or service area. Building plans and past maintenance paperwork may show its location. Avoid opening a lid yourself.
What if parts inside are broken?
Ask the provider to describe the damage and document it. A broken tee or baffle can affect how the interceptor holds back grease, so discuss what repair or replacement may involve.
Can cleaning happen while the kitchen is open?
That depends on the layout and the work needed. Wastewater use may need to pause while the interceptor is cleaned. Discuss your operating hours and access to the lids with the provider before scheduling.